Pouches

Fisher Container Corporation manufactures pouches in our state of the art ISO class 4 cleanroom. ( Please refer to the section on cleanroom manufacturing environment).

We can supply an incredible variety of pouch formats in numerous film and lamination types.  Please refer to film types section for readily available types.

Available pouch styles are:
Side Seal Pouch

Side Seal Pouch:

A pouch sealed on 3 sides.

 

 Corner Peel Pouches

Corner Peel Pouch:

A peel pouch seal with one corner used as a pull tag to allow easy open peel. For use in ETO sterilization.
Fold Over Bottom Pouch

Fold over Bottom Pouch:

A pouch sealed on 2 sides with a fold forming the bottom of the pouch.

 Tape Closure

Tape Closure:

A lip and tape can be added to many pouch formats to allow closure without heat sealing.  Permanent and reseal tape is available.
Top Load Zipper Pouch

Top load Zipper Pouch:

A ziplock pouch with the opening above the zipper. Your fill will be through the zipper.

  

Frangible:

A compartment pouch with seals between compartments designed to fail under pressure.  This allows you to fill compartments with different materials.  At a later time you apply pressure to break the frangible seals to mix the components without opening the pouch.
Bottom Load Zipper Pouch

Bottom Load Zipper Pouch:

A ziplock pouch with the bottom open.  You fill and seal your product into the compartment below the zipper.

 Stand Up Pouches

Stand-up:

A pouch with a bottom gusset allowing your product to stand up on shelf after fill.  Ziplock versions are available.
 

Peel Pouch:

A 3-side seal pouch with a peelable sealant layer. Ideal for sterile presentation, ETO, steam and gamma sterilization. Formats are available in a variety of film types.

 Header Pouch

Tyvek Pouches:

Permeable pouches made partially or completely from biological barrier tyvek.  Header, chevron and 3-side seal versions are available in peelable and non peelable formats. Gamma, ETO and steam sterilization formats are available.
Header Pouch

Header Pouch:

A pouch for ETO, gamma or steam sterilization with a peelable window.  A variety of film types are available.

  

Back Seam Pouches:

Pouches formed with a seal on one end and a seal down the middle of the back of the pouch.
Chevron Pouch

Chevron Pouch:

A pouch with an entire peelable side with a seal pattern shaped like a back jean pocket.  The outer area is square.  The unsealed area on the bottom corners allow for an easy pull grip.  Versions available for ETO and steam sterilization.

Side Gusset

Both sides of the pouch have a v fold that opens up forming a square opening at the top of the pouch.

K-Pouch:

Designed to act like a true stand up pouch, without the necessity of making expensive dies. A very cost effective solution for stand up packaging that displays your products in a stand up format on retail shelves.
  

Bottom Gusset :

A pouch with a v fold on the bottom. The base opens into a square, ideal for items with greater depth.

Fold Over the Top Pouch:

A bottom load pouch with seals on both sides and a fold forming the top of the pouch.